Mobile Barriers MBT-1® is tested, accepted and Federal-aid eligible for speed appropriate use on the National Highway System (NHS). It was originally conceived following a tragic incident in which two Colorado maintenance workers were killed by a wrong-way driver in June 2004. It underwent 4 years of development and refinement working with the Colorado Department of Transportation (CDOT) and the Federal Highway Administration (FHWA) before being first deployed in Colorado in June 2008. After further in service testing and evaluation, it was formally introduced in San Jose the following year where it received the American Traffic Safety Services Association’s (ATSSA’s) Innovation of the Year Award for 2009. It has since gone on to receive increasing accolades for improving safety, efficiency and traffic flows in and around work zones, including additional national and international awards from the American Road & Transportation Builders Association (ARTBA), the International Road Federation (IRF) and others. With life cycle costs of less than $20,000/yr the MBT-1® can pay for itself with nominal usage. Learn more about cost-benefits.
Mobile Barriers MBT-1® provides 42-102 feet (12-31 meters) of highly mobile positive barrier protection with minimal deflection. The MBT-1® essentially functions as an integrated barrier, utility vehicle,
and flatbed trailer all in one. It can be used with any standard semi-tractor with 60 inches (1.5 meters) of swing clearance and pulls fully set up at speed from site-to-site. It can be easily reconfigured
to the right or left depending on the end to which the tractor is attached (see Reconfiguration
), and can be ordered with integral power, lights, signage, TMA and other features. It has
lockable and on-deck storage at both ends. timelapse video
For crews, the MBT-1® protects against work zone incursions (front, back and side), reduces the number of vehicles and equipment otherwise needed on site (reducing clutter and congestion in the work zone), and improves lighting and ambient conditions (reducing fatigue and improving the general ability to focus on the work at hand). Each of these areas has been shown in applicable research to be significant contributors to fatalities and injuries within work zones.
For passing traffic, the MBT-1® helps improve safety while reducing the number and duration of lane closures. There's no better way to reduce work zone accidents and improve conditions for everyone than to safely complete the work as quickly as possible and reopen the roadway to normal traffic flow.
Mobile Barriers MBT-1® has been presented and highlighted at numerous national and international conferences and meetings, as well as in various articles and television news stories ( CW-DFW, . For additional pictures and information, please visit the NBC-DFW 2010) Resources page on this website.
"There’s no better way to reduce work zone accidents and improve conditions for everyone than to safely complete the work as quickly as possible and reopen the roadway to normal traffic flow."
|Reconfigurable||Reconfigurable to protect right or left side of road. Tractor & caboose attach at either end.|
|Accepted/Federal Aid Eligible||Accepted/Federal Aid Eligible under NCHRP 350 & MASH for TL-2 and TL-3 for use on the National Highway System.|
|Integrated Power||10K generator with 120/240V power outlets throughout barrier. 12/24V batteries & solar.|
|Work Lighting||Long-lasting, high lumen work lights for night operations.|
|Signage||Matrix board (with radar) or arrow board. Hydraulic lift. Solar, battery pack, & generator power.|
|Truck Mounted Attenuator (TMA)||TL-2 or TL-3.|