Specifications

"Improving Safety, Efficiency & Traffic Flows In & Around Work Zones"®



Specifications


picture_as_pdf View Mobile Barriers MBT-1® Sample Specifications



Configuration


Mobile Barriers MBT-1® provides 42-102 feet (12-31 meters) of highly mobile positive barrier protection with minimal deflection. The MBT-1® essentially functions as an integrated barrier, utility vehicle, and flatbed trailer all in one. It can be used with any standard semi-tractor with 60 inches (1.5 meters) of swing clearance and pulls fully set up at speed from site to site. It can be easily reconfigured to the right or left depending on the end to which the tractor is attached (see Reconfiguration add_circle_outline animation and add_circle_outline timelapse video ), and can be ordered with integral electrical power, lights, signage, TMA and other features. It has lockable and on-deck storage at both ends.


Configuration with 1 Wall Section


  • Modular 20 foot (6 meter) platforms with ballast boxes, stands, decking, tie downs & hardware.
  • Modular 20 foot (6 meter) wall section. Note that 0-3 wall sections can be used.
  • Caboose (movable rear axle assembly).
  • Reconfigurable to the right or left (tractor & caboose attach at either end).
  • Accepted/Federal Aid Eligible under NCHRP 350 & MASH for TL-2 and TL-3 for use on the National Highway System.

Common Options


  • Configurable from 42-102 feet (12-31 meters) by using 0-3 wall sections.
  • On-board power & power outlets (120/240V generator, 12/24V batteries & solar).
  • Work lights for night operations (long-lasting, high-lumen).
  • Message board (hydraulic lift).
  • Truck Mounted Attenuator - TMA (TL-2 or TL-3).

Basic Configuration w/ 1 Wall Section

  • Modular 20 foot (6 meter) platforms with integrated ballast boxes, stands, decking, tie downs & hardware.
  • Modular 20 foot (6 meter) wall section. Note that 0-3 wall sections can be used.
  • Caboose (movable rear axle assembly).
  • Reconfigurable to the right or left (tractor & caboose attach at either end).
  • Accepted/Federal Aid Eligible under NCHRP 350 & MASH for TL-2 and TL-3 for use on the National Highway System.

Common Options


  • Configurable from 42-102 feet (12-31 meters) by using 0-3 wall sections.
  • On-board power & power outlets: 120/240V generator, 12/24V batteries & solar.
  • Work lights for night operations: long-lasting, high-lumen.
  • Message board: hydraulic lift.
  • Truck Mounted Attenuator - TMA: TL-2 or TL-3.




New Options


Fans & Misters:
Card image cap
Tow with Dolly:
Card image cap